Fabulous Tips About How To Build A Plank Bridge

Install the 4 eye hooks in place where the bridge will hang.

How to build a plank bridge. Here i detail building a 12ft long, 4ft wide wood bridge over a creek. Plumb the stringers with a spirit level and place them 32” apart. I collect rock and make deep slots on each end of bank, dig down, lay in a rock chamber, with a big rock for the base.stick plank in it.

Includes full timelapse of the build, detailed plans, material list/cost as well as t. They are supported by small. As a guide, use a rasp (shown above) or power sander to shape the three top members so they’re aligned.

Work from one end of the bridge to the other. Step 1 level the ground and the first two concrete support piers use shovels and hand tools to level areas at the four corners of the bridge for supporting concrete blocks/piers. The basic design (see diagrams) has the two logs laid on a flat rock or a log sill at each end.

Pre drill 2 holes on each end of the boards all the way through the stringers and put in the 2 inch stainless steel screws and tighten. Lock them into position by fastening a couple of treads, as in the image. He says a plank footbridge would be a good option.

Big, half buried flat stones for approach.